Evo 106E, Owner'S Manual

Page: 12 / 29

FUNCTIONS
COMPUTER OPERATION INSTRUCTIONS
When initially powered on the console will perform an internal self-test. During this time all the lights will turn
on. When the lights go off the dot matrix display will show a software version. (ie: VER 1.0) The odometer
reading displays how many hours the elliptical has been used and how many virtual miles the elliptical has gone.
The display will look like this: ODO 12.3
（
KM
）
12:34
（
hour : minute
）
Power up
The Elliptical is supplied with an external power supply. When power is connected to the Elliptical, the console
will automatically power up. If there is no input to the console for 20 minutes the console will go to stand-by
mode. In stand-by mode the console display will turn off. To turn the console on press any key.
The odometer will remain displayed for only a few seconds then the console will go to the start up display. The
dot matrix display will be scrolling through the different profiles of the programs and the message window will be
scrolling the start up message. You may now begin to use the console.
11