Evinrude E-tec 2011 Series, Product Service Update

Page: 20 / 104

18
1. Clamp, oil sensor to housing, P/N 982115
1
115 – 300 HP 60°/90° V4/V6 MODELS
Lower Engine Covers 115 – 200 HP 60° Models
Lower engine covers for 115 – 200 HP 60° models have been changed. The
lower engine covers feature a new fastener insert that reduces the risk of crack-
ing the lower engine covers during removal and installation.
Service parts for older product will supersede to new part numbers. Refer to the
correct
Parts Catalog for parts ordering information.
Note: Do not use power/impact tools to tighten lower engine cover screws.
Oil Pressure Sensor 115 – 300 HP Models
Clamp, P/N 982115, is now used to retain the oil pressure sensor to the oil pump
housing on all V4 and V6 models.
This change improves the retention of the oil pressure sensor and provides com-
mon service parts for these models.