Evinrude E-tec 2011 Series, Product Service Update

Page: 30 / 104

28
200 – 300 HP 90° V6 MODELS
Ordering Replacement Gearcases
The L2-Type gearcase with the
0
.58 (1.71:1) gear ratio is no longer available.
Use an M2-Type gearcase with the
0
.54 (1.85:1) gear ratio if replacement is
needed.
Because a gearcase conversion kit is required, existing part numbers do not
supersede. Dealers who enter an order for a
0
.58 gear ratio L2-Type gearcase
will receive an invoice with a “Note” to call the After Sales Service Department.
This will result in delays receiving the correct replacement gearcase.
Order the following parts:
•
Select the correct M2-Type replacement gearcase.
Refer to the
Parts Catalog for replacement gearcase part numbers.
•
Select the correct gearcase conversion kit –
• order P/N 5008535, for 20 inch models.
•
order P/N 5008536, for 25 inch models.
Gearcase conversion kits include the correct shift rod, a new exhaust grommet,
new gearcase mounting screws and installation instructions.
Refer to the installation instructions for the following:
•
Exhaust grommet and Oetiker clamp installation.
•
Shift rod installation and shift rod height adjustment.
•
Correct water inlet screen selection.
•
Correct trim tab selection and installation.
•
Gearcase mounting screw torque.
•
The change of gear ratio requires a change of propeller pitch.
M2-Type Gearcase
Gearcase Conversion Kit (Typical)