Evinrude E-tec 2011 Series, Product Service Update

Page: 58 / 104

56
I-Command Bulletins
This list of bulletins provides a reference to specific I-Command issues.
Bulletin
Number
Subject Affected Models Problem
2006-04(P)
I-Command Classic
Instruments
All I-Command Classic instruments
with date codes prior to and including
date code 089/06 are suspect.
Certain I-Command Classic instruments may
accumulate moisture internally and experience
excessive lens fogging. Instruments with an accu-
mulation of internal moisture should be replaced.
2006-04(S)
Evinrude E-TEC CAN-
Bus Software Update
All Evinrude E-TEC 115–250 HP out-
boards using CANBus network com-
munications.
NMEA 2000 Lowrance † depth-finders and GPS
units can interfere with engine management mod-
ule (EMM) functions on certain
Evinrude
E-TEC outboards during certain CANBus commu-
nication modes.
2007-01(P)
I-Command Network
Connector(s)
2005 & newer 200 - 250 HP 90° V6
2007 & newer 115 - 200 HP 60° V4/V6
2008 & newer 40 - 90 HP This bulletin provides information related to a
change in
I-Command network connectors. (Blue
to Red connectors)
2008-01(P)
I-Command and NMEA
2000 Network Connec-
tors
ALL
This bulletin provides information related to the dif-
ferences in
I-Command compatible DeviceNet-
style connectors.
2008-03(P)
I-Command Water
Pressure Sensor Kits
ALL
This bulletin provides information related to the
selection and installation of
I-Command water
pressure sensors kits.
2008-04(P)
I-Command Fuel Level
Converter Kits
ALL
This bulletin provides information related to the
configuration of
I-Command fuel level converters.
2010-01(P)
I-Command Digital
Gauges
ALL
This bulletin provides recommended service pro-
cedures and information to update software and to
submit warranty allowance requests.