manualshive.com logo in svg

evertz XRF1, User Manual, Page: 41 / 60

Share
Download
evertz XRF1 User Manual Download Page 41

 

XRF1/XRF1A 16x16 RF Router Manual 

CONTROL PANEL OPERATION 

Revision 1.2

 

XRF1 - 5-1 

5. 

CONTROL PANEL OPERATION SPECIFICATION 

5.1. 

[PANEL LOCK] FUNCTION 

Panel Lock can be initiated from any mode.   When Panel Lock is enabled from any mode, the display 
screen will timeout after 30 seconds and return to 

Destination Selection

 Mode.  If a user manipulates any 

buttons or knobs on the control panel while Panel Lock is enabled, a “PANEL LOCKED” message will be 
displayed for 2 seconds and the display will then return to 

Destination Selection

 Mode.  (Refer to section 

4.3.5 for a further description of the Panel Lock display function.) 
 

5.1.1.  [PANEL LOCK] Enable 

Press [PANEL LOCK] 
All buttons are “locked out” of use and the PANEL LOCK LED is illuminated. 
 

5.1.2.  [PANEL LOCK] Disable 

Press [PANEL LOCK]  
All buttons are available for use and the PANEL LOCK LED is dark. 
XRF1 Control Panel is in default Destination Selection Mode. 
 

SOURCE 

SELECTION 

MODE

panel unlocked

DESTINATION 

SELECTION 

MODE

panel unlocked

CONFIGURATION 

MENU MODE

panel unlocked

CONFIGURATION 

SET MODE

panel unlocked

PRESS 

[PANEL LOCK]

DESTINATION 

SELECTION 

MODE

panel unlocked

PRESS 

[PANEL LOCK]

DESTINATION 

SELECTION 

MODE

panel locked

SALVO 

SELECTION 

MODE

panel unlocked

(DISPLAY)

“PANEL 

LOCKED”

when any buttons/

knobs are 

manipulated

 

Figure 5-1: Panel Lock Operation 

 

"

 

If ‘Panel Lock” is enabled from Configuration Menu or Configuration Set Modes, 
the panel will timeout after 30 seconds and return to Destination Selection Mode 
without saving any

 

configuration parameter changes. 

 

Summary of Contents for XRF1





























































Reviews:

No comments