manualshive.com logo in svg

evertz XRF1, User Manual, Page: 11 / 60

Share
Download
evertz XRF1 User Manual Download Page 11

 

XRF1/XRF1A 16x16 RF Router Manual 

OVERVIEW 

Revision 1.2 

XRF1 - 1-1   

1. OVERVIEW 

The Evertz XRF1 signal management platform is a routing and monitoring system for L-Band, stacked L-
Band and 70/140 MHz IF signal applications.  It provides a compact, reliable method for building routing 
matrices from 16x16 to 32x32 inputs and outputs.  In addition to routing RF signals, it provides control, 
monitoring, and alarm reporting of critical signal parameters such as input signal presence, input signal 
level and gain control.  LNB DC supply voltages (+13 and +17 Vdc) are available on all 16 inputs to this 
device with overload and short circuit protection and alarming. 
 
The XRF1 is comprised of a standalone 1RU chassis that can be expanded up to 32x32 with additional 
XRF1 units and SRF series splitter/combiners.  As a system option, redundant power supplies are 
available to further enhance system reliability. 
 
The XRF1 is available with a built-in control panel and may be remotely controlled with Evertz X-NCP2 
control panel, with Evertz 

Vista

LINK

®

, or with other third party monitor and control (M&C) systems.  Evertz 

provides an SNMP interface over Ethernet as well as an RS323/422 control port for serial control 
applications.   
 

1.1. 

HOW TO USE THIS MANUAL 

This manual is organized into 8 chapters: Overview, Installation, Configuration (chapters 3&4), Operation, 

Vista

LINK

®

, and Technical Description.  

 
Chapter 1 contains a quick summary of the router features used throughout the remainder of the manual. 
 
Chapter 2 provides a detailed description of the rear panel connectors and a guide for connecting the 
router to your existing system. 
 
Chapter 3 describes the configuration of the router using the serial port or Telnet. 
 
Chapter 4 describes the configuration of the router using the front panel controller. 
 
Chapter 5 provides a reference specification for front panel control of the router. 
  
Chapter 6 provides a description of router operation using the optional remote control panel. 
 
Chapter 7 describes how to control and configure the XRF1 router using 

Vista

LINK

®

. 

 
Chapter 8 lists the specifications for the XRF1 router.  
 
 
 

!

 

 
Items of special note are indicated with a double box like this. 
 

 

Summary of Contents for XRF1





























































Reviews:

No comments