manualshive.com logo in svg

evertz XRF1, User Manual, Page: 37 / 60

Share
Download
evertz XRF1 User Manual Download Page 37

 

XRF1/XRF1A 16x16 RF Router Manual 

FRONT PANEL INTERFACE 

Revision 1.2

 

XRF1 - 4-13 

INDICATOR NAME

 

COLOUR

 

WHEN LIT 

LIT INDICATION

 

DARK INDICATION

 

PANEL LOCK LED 

Green

 

Panel controls are fully locked out of 
operation 

Panel controls are available for 
manipulation 

INPUT LED 

Green

 

Source Selection Mode initiated 

When lit with the OUTPUT LED, 
indicates Salvo Selection Mode 
initiated 

Panel not in Source Selection Mode 
or Salvo Selection Mode 

OUTPUT LED 

Green

 

Destination Selection Mode initiated 

When lit with the INPUT LED, indicates 
Salvo Selection Mode initiated 

Panel not in Destination Selection 
Mode or Salvo Selection Mode 

MENU LED 

Green

 

Configuration Menu Mode initiated 

Panel not in Configuration Menu 
Mode 

LOCK LED 

Blinking

 

Green

 

Selected destination has been ‘locked’ 
out of availability from unauthorized 
users or selected salvo contains a 
‘locked’ destination. 

Selected destination is not locked or 
selected salvo does not contain 
locked destination. 

PROTECT LED 

Blinking

 

Green

 

Selected destination has been flagged 
as ‘protected’ to users or selected 
salvo contains a ‘protected’ destination.

Selected destination is not protected 
or selected salvo does not contain 
protected destination. 

PSU STATUS  

1 & 2 LED’s 

Green

 

Power supply unit(s) are functioning 
properly 

Power supply is not in use, or is in 
“Fault” status 

ETHERNET LED 

Green

 

Ethernet network communication is 
functioning properly 

Ethernet network communication has 
been lost and is in “Fault” status 

FAULT LED 

Red

 

Corresponds to any trap breech within 
the router configuration 

Router hardware is functioning within 
acceptable parameters 

Table 4-8: Description of Status Indicator LED Functions 

 

"

 

The “LOCK” and “PROTECT” LED’s will blink at 2 Hz. 

 

4.5. CONFIGURATION 

MENU 

OVERVIEW 

4.5.1.  Configuration Menu Function and Display 

The 

Configuration Menu

 allows the user to access all configuration parameters for the XRF1 RF Router via 

the front face Control Panel.  The 

Configuration Menu

 is accessed via the [MENU] button, and the user has 

the option to enable passcode protection for this menu.  (Refer to section 4.3.1.5 for further description of 
the 

Configuration Menu

 passcode protection). Figure 4-3 defines the 

Configuration Menu

 structure, per 

input channel. 
 

Summary of Contents for XRF1





























































Reviews:

No comments