XRF1/XRF1A 16x16 RF Router Manual
XRF1 - 3-2
Revision 1.2
SERIAL
PORT
3.3. CONFIGURATION
MAIN
MENU
With power applied to the chassis, the frame controller will automatically initiate a boot up procedure,
resulting in the top-level configuration menu being displayed in the terminal program or telnet session.
------------------------------------------------
| Main Menu |
| (XRF1-FC v1.00 b961)
|
------------------------------------------------
(1) Network Configuration
(2) Router Configuration
(3) SNMP Setup
(4) Serial Control Port Configuration
(5) Show Card Status
(6) Engineering/Debug
(X) Exit
>
At the prompt, enter the number from the menu list, and press “ENTER”. Remember to save the changes
prior to exiting each configuration menu. Some of the settings require the frame controller to be re-booted
prior to the changes taking effect. This is accomplished by cycling power to the router frame, or by
executing the “Reboot” command from the Engineering/Debug menu.
The (X) option exits the current menu and moves up one menu level.
3.4.
NETWORK CONFIGURATION MENU
The network configuration menu displays the existing network settings for the frame controller. To change
any of these values, select the appropriate number from the list, then press “ENTER”, and you will be
prompted for a new value.
"
NOTE: After changing a network setting, the new setting must be saved prior to
exiting configuration mode by selecting “(S) Save and Exit” after each change in
the network configuration.