manualshive.com logo in svg

evertz XRF1, User Manual, Page: 24 / 60

Share
Download
evertz XRF1 User Manual Download Page 24

 

XRF1/XRF1A 16x16 RF Router Manual

 

XRF1 - 3-8 

Revision 1.2

 SERIAL 

PORT 

3.7. 

SERIAL CONTROL PORT CONFIGURATION 

The serial control port menu is used to set the configuration of the serial control port located on the rear of 
the frame.  It also displays the current settings stored in flash memory.  This port is used to control the 
routing matrix from external, third party control systems.  This menu does not configure the 
configuration/upgrade port located on the front edge of the frame controller card. 
 

 ------------------------------------------------ 
|       Serial Control Port Configuration        | 
|              (XRF1-FC v1.00 b961)              | 
 ------------------------------------------------ 
 ------------------------------------------------ 
 Baud Rate: 115200 
 Data Bits: 8 
    Parity: None 
 Stop Bits: 2 
  Standard: RS 232 
  Protocol: Evertz Router Control 
 ------------------------------------------------ 
(1) Set baud rate 
(2) Set number of data bits 
(3) Set parity 
(4) Set number of stop bits 
(5) Set standard 
(6) Set protocol 
 
(X) Exit 
>

 

 

3.8. 

ENGINEERING / DEBUG 

This menu contains several menu commands that are intended for use only by Evertz engineering staff. 

 

Summary of Contents for XRF1





























































Reviews:

No comments