manualshive.com logo in svg

evertz XRF1, User Manual, Page: 38 / 60

Share
Download
evertz XRF1 User Manual Download Page 38

 

XRF1/XRF1A 16x16 RF Router Manual

 

XRF1 - 4-14 

Revision 1.2

 FRONT 

PANEL 

INTERFACE 

4.5.2.  Configuration Main Menu Options and Parameters 

The following options are available at the top level of the configuration menu: 
 

PARAMETER DESCRIPTION 

Configure Input 

Allows configuration of all inputs (see section 5.2 for more info). 

Configure Output 

Allows configuration of all outputs. 

Lock Idle Panel 

Allows locking of panel after inactivity for 5 minutes.   
Panel is unlocked by pressing the [PANEL LOCK] key. 

IP Address 

Displays the router IP address. 

Firmware Version 

Displays the firmware version. 

Reboot 

Allows a ‘warm’ reboot of the router processor.   

Configuration settings are maintained during a reboot. 

Table 4-9: Configuration Menu Options 

4.5.3.  CONFIGURE OUTPUT Menu Options and Parameters 

LEVEL1:     
 

PARAMETER DESCRIPTION 

All Outputs  

Allows configuration of all outputs. 

Channel 1 to 16 

Output channel selection. 

Table 4-10: Configure Output Menu Options 

 

 

LEVEL 2:   (options available for ALL INPUTS or individual input channel as selected in Level 1) 

 

PARAMETER DESCRIPTION 

Output Delay 

Accesses output delay setting, set from 0 to 5000ms in 100ms increments. 

Table 4-11: Options Available for ALL INPUTS or Individual Input Channel 

as Selected in Configure Output Menu Level 1 

 

Summary of Contents for XRF1





























































Reviews:

No comments