45
TORCH CONSUMABLE CROSS OVERLIST FOR
36 SERIES MIG TORCH
NOTICE:
NOTE: At time of publication, the standard torch provided with Power i
-
MIG 353dpI is commonly known as the 36 series. This torch may be
supplied by Binzel®, Trafimet®, or Innotec®. However the consumables and most parts interchange except the torch handle design and trig-
ger. The widely used Euro
-
connecter on the MIG torch also ensures that the customer can fit and install almost any other type MIG torch since
most manufacturers offer torches with a Euro connector as an option. This list is provided as a general cross reference as a courtesy from
Trafimet®, and does not guarantee that every variation or type is directly available from Everlast. In the left column, the OEM part numbers are
listed, and in the far right column, the Binzel®, part number is listed as reference. These parts are interchangeable with the Innotec part num-
ber. You can find list of stocked consumables on the Everlast website. To cross reference to the Trafimet® part number, remove the EV prefix
from the Everlast Part number.
Section 2 Setup Guide
Summary of Contents for Power i-MIG 353DPi
Page 47: ...47...
