39
MIG Control Features of the Power i
-
MIG 353DPi
PREFLOW
POSTFLOW
WELDING
BURNBACK
TIME
VOLTS
2T
PREFLOW
POSTFLOW
BURNBACK
TIME
VOLTS
END
4T
PREFLOW
POSTFLOW
BURNBACK
TIME
VOLTS
END
4T SPCL
Single Pulse and Non
-
Pulse 2T
Single Pulse and Non
-
Pulse 4T
WELDING
Single Pulse 4T Special
WELDING
HOT START
The graphical representation above depicts the motions of the MIG Gun trigger
in relation to the welding mode. Each movement of the MIG gun trigger signals
the unit to start a new phase of the weld cycle. A
“
press
”
of the trigger is one
movement represented by the
“
down
”
arrow. A
“
release
”
of the trigger is an-
other movement of the torch switch and is represented by the
“
up
”
arrow. The
4T special mode is not available to standard and synergic non
-
pulse modes.
Section 2 Setup Guide
Summary of Contents for Power i-MIG 353DPi
Page 47: ...47...
