EverFocus NDVR User Manual Download Page 90

Page: 90 / 152

NVR/DVR/Hybrid NDVR System

89 -

Auto Backup Statistic:

Shows statistics on current or latest backup status. Click

Refresh

to update.

Current Backup Status:

Idle: not active or awaiting next backup process
Backup…: Backup under process
Retry…: Previous backup failed, awaiting retry

Next Backup Start Time:

Scheduled time for next backup process

Next Retried Process Time:

Scheduled time for next backup retry process. N/A when status is Idle or

under Backup.

Last Backup

Last Backup Start:

Time and date last backup started.

Last Backup Stop:

Time and date last backup was complete or had failed.

Backup Video Period:

Total time spent on last backup process.

Backup Size:

Total file size of last backup.

Backup Result:

Completed: Last backup succeeded.
Failed: Last backup failed, under retry process.
Timeout: Last backup failed, retry process timed out.

5.11 License Manager

The license of the software should be registered first before operating the former version of Intelligent
Surveillance System.

Execute the License Management Tool in Config >License Manager to activate the license from dongle or
serial number allocated with the software package, or de-activate the license then bring it to another PC
to activate it again.

Note

Please refer page 130 for the detail setting of License Management tool.

Refresh

Summary of Contents for NDVR

























































































































































Search results

Summary of Contents for NDVR

Reviews:

Related manuals for NDVR

Brands by name

Popular brands

EverFocus NDVR, User Manual

Search results

Summary of Contents for NDVR

Reviews:

Related manuals for NDVR

Brands by name

Popular brands