EverFocus NDVR User Manual Download Page 117

Page: 117 / 152

NVR/DVR/Hybrid NDVR System

116 -

Server List

General Setting

9.1 Setting

Click General Setting to obtain setting dialog.

9.1.1 General Setting

Audio preview:

Enable audio on active channel:

Select to enable audio streaming on active channel.

Miscellaneous:

Synchronize video frames:

Select to avoid image tearing problems that may occur while CPU

loading is increased.

9.1.2 Server setting

Step 1:

Enter the Server Name.

Step 2

Enter the Address, Port, User Name, and Password to log in the server.

Step 3:

Enable “Save Password” to login without entering the password again.

Step 4:

Enable “Auto Login” to login automatically when starting Remote Live Viewer.

Step 5:

Click on Test Server to check if the server is available.

Step 6:

Click Add to insert the setting to server list.

Note:

Summary of Contents for NDVR

























































































































































Search results

Summary of Contents for NDVR

Reviews:

EverFocus NDVR, User Manual, Page: 117 / 152

Search results

Summary of Contents for NDVR

Reviews: