EverFocus NDVR User Manual Download

Page: 76 / 152

NVR/DVR/Hybrid NDVR System

75 -

5.2 Setting - Camera

5.2.1 Add Camera

Four function buttons will be included in the Setting/Camera panel if you have our Hybrid Surveillance
System license for IP camera.

Search:

Click on the

Search icon for the Search IP Camera panel. The system will start scanning

automatically; click on the Stop Scan button to stop scanning any time.

Fill in the user name and password for each IP camera found and click OK to add it to the camera list.

Insert:

Click on the Insert icon for the IP/Video Server Setting panel and add IP cameras to the list. See

following part (IP Camera/Video Server Setting panel) for detail.

Delete:

Click on the Delete button to remove the selected IP camera(s) from the system. Click

OK to finalize

the modification.

Config:

Click on the Config button for the IP/Video Server Setting panel. You can modify the IP camera

Config

Delete

Insert

Search

Config

Summary of Contents for NDVR

























































































































































Search results

Summary of Contents for NDVR

Reviews:

Related manuals for NDVR

Brands by name

Popular brands

EverFocus NDVR, User Manual

Search results

Summary of Contents for NDVR

Reviews:

Related manuals for NDVR

Brands by name

Popular brands