EverFocus NDVR User Manual Download Page 120

Page: 120 / 152

NVR/DVR/Hybrid NDVR System

119 -

9.1.7 Monitor Display Setting

Activate auto scan to rotate the channels/ cameras on screen.

Note

For instance, you may select to show only 4 sub-screens on the live viewer while having 16
channels connected to the system. With auto scan function, you will be able to see all 16 channels
by turns.

Each monitor supports up to an 8x8 layout with auto scan function to show 128 channels.

Step 1:

Select the Monitor connected to the system.

Step 2:

Auto scan group: Select appointed server group to activate auto scan settings.

Step 3:

Primary channel: Select appointed channel that will always be on the screen when auto scan is

activated.

Step 4

Secondary channel: Select appointed channel with secondary priority behind primary channel when

auto scan is activated.

Step 5:

Layout: Select the screen division of “NxN type” in Remote live viewer panel.

9.1.8 Notification Setting

Step 1

Step 2

Step 3

Step 4

Step 5

Summary of Contents for NDVR

























































































































































Search results

Summary of Contents for NDVR

Reviews:

Related manuals for NDVR

Brands by name

Popular brands

EverFocus NDVR, User Manual

Search results

Summary of Contents for NDVR

Reviews:

Related manuals for NDVR

Brands by name

Popular brands