EverFocus NDVR, User Manual, Page: 82 / 152

NVR/DVR/Hybrid NDVR System
- 81 -
5.5 Setting – Hotline
Configure the settings of various contacts or devices, including E-mail, FTP, GSM modem and Telephone calls
which will be triggered upon event detection.
E-mail: Input the following information: Server, Port, and Sender’s E-mail address, E-mail’s subject title, Body
content and SSL option for encrypted transmission. Click on the Send Test Mail button to test the settings.
Note:
* indicates mandatory fields
FTP: Input the following information: server, Port, Login ID, Password, and Upload directory, according to your
FTP type to enable/disable Passive mode. You may click on the Upload Test File button to test the settings.
Note: * indicates mandatory fields
Telephone: Select the modem that the system is going to dial the info call with, and then insert the phone
number you want to dial to. (A modem is required for voice transition.)
Note : 1. You must use a modem with voice capability.
2. You may select a Wave format file; it will be played in the phone to alarm the person who picks
up the phone call.
GSM modem: Set the Port and Baud Rate of the GSM modem device, and then enter PIN code. You can
setup the interval of send SMS message. You may click on Test to send a test SMS message.
Note: The interval is set to fix a minimum time period between two SMS messages. If set as 60 min, the
SMS between 60 min would be deleted and not sent to user.