EAN Series
64
Send Mail Notification:
Click if you want the camera to send an email text notification and
one image file to the email address entered in the Set SMTP Server(email) field of the
Network > SMTP/FTP page, if the Event occurs (see
7.3.3 SMTP / FTP
).
Upload to FTP:
Click if you want the camera to upload the recordings to the FTP server
entered in the Set SMTP Server(email) field of the Network > SMTP/FTP page, if the Event
occurs (see
7.3.3 SMTP / FTP
).
Record to SD Card:
Click if you want the camera to start recording its video feed (when the
event occurs) on an on-camera SD Card (if such a card has been inserted).
Note:
The recording will only be as long as the combined Pre- and Post-trigger Buffers, so
make sure you enable at least one of these buffers, especially the Post-trigger Buffer.
Record to PC:
Check this box if you want the camera to start recording its video feed (when
the event occurs) on the same folder on the same PC as configured on the User Config >
Recording/Snapshot page (if such a folder has been enabled and configured).
Note:
The recording will only be as long as the combined Pre- and Post-trigger Buffers (and
for as long as the event trigger is happening – e.g. a motion is detected), so make sure you
enable at least one of these buffers, especially the Post-trigger Buffer.
Network Alarm:
Check this box if you want the camera to send a network alarm signal (when
the event occurs) to the CMS servers configured on the Network > Network Alarm page (see
7.3.6 Network Alarm
).
Click
Apply
to apply the changes or
Cancel
to cancel the changes and return to the previous
settings.
【
Pre/Post Trigger Settings
】
Pre-trigger Buffer:
Select the duration for the buffer. This will determine the amount of footage
(length of time) before the event trigger moment that will be included in an event-triggered video
recording, if that buffer and video recording has been enabled in the Event Configuration Window.
Post-trigger Buffer:
Select the duration for the buffer. This will determine the amount of footage
(length of time) after the event trigger moment that will be included in an event-triggered video
recording, if that buffer and video recording has been enabled in the Event Configuration Window.
Click
Apply
to apply the changes or
Cancel
to cancel the changes and return to the previous
settings.
Summary of Contents for EAN Series
Page 57: ...EAN Series 51 EAN3300...
