EAN Series
41
Flicker Compensation:
Check the box to enable the Flicker Compensation function. Please enable
this function only if flicker artifacts are observed.
Night Mode:
Select a camera mode and then click the
Apply
button to save the settings.
High Contrast:
Select High Contrast mode to have images with higher contrast ratio. You can
further configure the camera settings on the Advanced setup page if required. Note that
selecting the Vivid mode will lock (grayed-out) some Camera Settings on the Advanced setup
page such as
Exposure Settings (AE)
,
Noise Reduction Settings
and
Monitor Settings
.
Standard:
Select Standard mode to have images with system configured settings. You can
further configure the camera settings on the Advanced setup page if required. Note that
selecting the Vivid mode will lock (grayed-out) some Camera Settings on the Advanced setup
page such as
Exposure Settings (AE)
,
Noise Reduction Settings
and
Monitor Settings
.
More Detail:
Select More Detail mode to enhance the dark parts of the images. You can
further configure the camera settings on the Advanced setup page if required. Note that
selecting the Vivid mode will lock (grayed-out) some Camera Settings on the Advanced setup
page such as
Exposure Settings (AE)
,
Noise Reduction Settings
and
Monitor Settings
.
User Define:
Select User Define mode to customize the camera settings. You can configure all
the camera settings on the Advanced setup page.
Blur Compensation:
Check the box to enable the Blur Compensation function. Please enable this
function only if motion blur is observed.
【
Camera Settings
】
Mirror:
Switch Mirror ON to rotate the image horizontally around a vertical axis.
Flip:
Switch Flip ON to rotate the image vertically around a horizontal axis.
BLC:
Back Light Compensation (BLC) is used to make the subject appear clearer when it is set against
a bright background.
OFF:
Select to switch Back Light Compensation functions off.
ON (BLC):
The BLC
can increase the exposure of a dark area surrounded by a brighter area,
HLC can decrease the exposure of bright areas surrounded by darker areas. This enables the
camera to better display information that would otherwise have been “whited out”, like a
license plate between two bright headlights on a dark road.
ON (HLC)
: The Highlight-Suppression BLC is used to reduce the brightness of light sources in a
specific area. It is activated only in a low illumination environment to minimize the effects of
glare from bright lights such as spotlights, street lights or headlights in the field of view.
Summary of Contents for EAN Series
Page 57: ...EAN Series 51 EAN3300...
