34
35
Eurotramp - Trampoline Kurt Hack GmbH | Kids Tramp Serviceheft - Version 1.0/2018-09
Eurotramp - Trampoline Kurt Hack GmbH | Kids Tramp Serviceheft - Version 1.0/2018-09
Instalation of a Kids Tramp 2 m – without concrete bedding
Instalation of a Kids Tramp 2 m – without concrete bedding
31
30
12
65
65
20
30
30
61
combined frost
protection and base
layer
combined frost
protection and base
layer
210 cm
200 cm
5
5
grit 2 – 5 mm
grit 2 – 5 mm
existing ground
existing ground
existing ground
possible slag
air space
Slope angle depending
on the soil quality
Slope angle depending
on the soil quality
free space beneath jumping bed centre
210 cm
200 cm
5
5
210 cm
200 cm
5
5
65
65
20
65
65
30
30
30
30
20
200 cm
200 cm
min 544 cm / Loop: min Ø 543
inclined
surfac
inclined
surfac
inclined
surfac
inclined
surfac
KFT - Material
KFT - Material
grit 2 – 5 mm
grit 2 – 5 mm
grit 2 – 5 mm
grit 2 – 5 mm
safety area
(from end of jumping bed)
safety area
(from end of jumping bed)
Preparing a square pit
•
Dimensions: 210 x 210 cm
•
Depth: 71 cm
•
On cohesive soil, a vertical recess should be possible in a
short time. On non-cohesive or loose soils, an angle of
slope should be maintained to prevent subsequent slipping
of the edges.
Profile diagram
Suitable Kids Tramp models
•
Art. 97510: Kids Tramp “Kindergarten XL“
•
Art. 97112: Kids Tramp “Kindergarten Loop XL“
•
Art. 97500: Kids Tramp “Playground XL“
•
Art. 97012: Kids Tramp “Playground Loop XL“
•
Art. 97500B: Kids Tramp “Playground XL“
+ special coating
•
Art. 97012B: Kids Tramp “Playground Loop XL“
+ special coating
Required material
•
1,85 m
3
KFT - combined frost protection and base layer
material
•
0,12 m
3
grit 2 – 5 mm
Pit preparation
•
Place 42 cm combined frost protection and base layer in
the pit and compress it well with a pit to the centre (see
illustration – possible sag). The top edge of the combined
frost protection and base layer material in the support area
should be 31 cm below ground level.
•
Once preparations are complete, the Kids Tramp can be
placed on the well-compacted combined frost protection
and base layer. Fill the remaining cavities between the
equipment and the existing ground with 2 – 5 mm grit.
•
Add humus to the top 5 – 10 cm to create a seamless
transition to the existing ground.
•
Drainage must be added to cohesive (impermeable) soil.
The pit must be dug 10 cm deeper and a drainage pipe
fitted which can be connected to an appropriate outflow
(e.g. sewerage system). The combined frost protection and
base layer increases from 42 cm to 52 cm.
Attention:
the Kids Tramp must be installed on a level
surface and not on a mound or slope.
Floor plan / top view
Installation of a Kids Tramp 2 m — without concrete bedding
