40
41
Eurotramp - Trampoline Kurt Hack GmbH | Kids Tramp Serviceheft - Version 1.0/2018-09
Eurotramp - Trampoline Kurt Hack GmbH | Kids Tramp Serviceheft - Version 1.0/2018-09
Adhesive instructions for bonded impact protection
Pit placement
1
4
5
2
3
1
2
4
3
Attention:
3x thick traces
of glue
must be applied
along
the rounded edge.
Done!
•
The glue is laid on in circular form on the out-standing
squares and along the rounded edge.
•
Place the impact protection tile flush on the frame and tap
strongly.
Material
•
Glue for bonded impact protection
system (Art. E97003)
•
Cartridge applicator gun (not in
scope of delivery)
The Kids Tramp can now
be placed in the pit.
Attention:
the purchase of the Impact protection system is optional.
•
This figure shows a recess with a frost protection and base
layer (without concrete support). Follow the same series of
steps for a recess with a concrete support.
•
Finally, fill the cavities with grit or humus to create a
seamless level between the equipment and the ground.
•
As a soil material in the safety area Eurotramp
recommends the use of topsoil (natural soil), wood chips
or alternatively bonded impact protection with a maximum
height of fall of at least 100 cm.
•
Then dig out the recess and position the Kids Tramp.
•
Use a spirit level to check the horizontal positioning of the
Kids Tramp.
!
!
Adhesive instructions for bonded impact protection
Pit placement
