42
43
Eurotramp - Trampoline Kurt Hack GmbH | Kids Tramp Serviceheft - Version 1.0/2018-09
Eurotramp - Trampoline Kurt Hack GmbH | Kids Tramp Serviceheft - Version 1.0/2018-09
Jumping bed replacement
Pit cleaning
3
4
5
1
2
!
!
Attention:
do not unhook
corner springs yet.
Material
•
Mounting tool (Art. E31100)
•
1 pair of safety gloves (not in scope of delivery)
•
1 large board (not in scope of delivery)
•
2 blocks of wood (not in scope of delivery)
•
Now the corner springs
can be unhooked.
•
Remove jumping bed.
New jumping bed installation
•
The installation ofthe new jumping bed is done in the reverse order
than the removal (
h, g, f, e, d, c, b, a
).
•
Playground models: the new jumping bed must be installed with the
Eurotramp-Logo facing up
.
•
Kindergarten models: the new jumping bed must be installed with
the
stamped side facing up
.
•
Only half the jumping bed needs to be unhooked to clean the pit.
Again, ensure that the corner springs are unhooked last.
•
Fold the jumping bed onto the other half, and clean the pit
•
To hook the jumping bed back into place, reverse these steps.
Pit cleaning
•
Push the 2 blocks of wood between the frame and the
jumping bed, so that the jumping bed is pushed down and
the springs are visible.
•
Remove the steel springs with mounting tool in the
order
a, b, c, d, e, f, g, h
(
see illustrations 3 and 4
).
The steel springs should be
removed from inside of the Kids
Tramp.
In the following link you can find
a video to the dissambly of the
jumping bed:
www.eurotramp.
com/Kids Tramp-support
•
Place the large board in the middle and across the Kids
Tramp.
Jumping bed replacement - all Kids Tramp models
