100 MM GRAPHICS RECORDER: USER GUIDE
HA027271
Issue 12 Mar 04
User Guide
Page 22
Login
Select the required access level and enter the password if
required.
User
Logged out
Cancel
Operator
Engineer
Service
Logged out
3.3.1 Access to Configuration
1
Once the recorder has initialised, touch the Root key, followed by 'Login'. Touching the 'Logged out' field in the
resulting display, calls the access level picklist as shown in figure 3.3.1a.
2
Press 'Engineer' to call the Password request page.
3
Touching the blank Password area calls the keyboard display (see figure 3.3.1b).
4
Touch <Numeric><1><0><OK> to enter the password '10'. The screen reverts to the 'Home' page.
5
key followed by a touch on the Operator key calls the top level page allowing access to the
Archive, Save/Restore, Config, Security
areas described in section 4 below.
*Network configuration appears only if the Ethernet option is fitted.
Figure 3.3.1a Access to configuration
Note: The figure above shows 'Login by user list'. If the Security Manager option is fitted, an alternative
procedure (Login by user ID) is possible. See
