100 MM GRAPHICS RECORDER: USER GUIDE
User Guide
Page 79
HA027271
Issue 12 Mar 04
New User ID
New Password
Retype Password
Based On
Operator
Apply
Discard
Add
New Full User Name
User
Frederick Bloggs
Apply
Discard
Remove
4.4.3 Add user
Figure 4.4.3 shows that the selecting of 'Add User' from the SECURITY picklist allows new users to be entered, to-
gether with passwords, and a chosen set of access permissions, which can subsequently be edited under Security/
Access. The ADD key and the APPLY key must both be used to write the change to the recorder data base. The user
must have Full Security access in order to add a new user.
NEW USER ID
This field allows a User ID of up to 20 characters to be entered for a new user. This ID is used when logging in using
ID/password entry technique (that is, when '
Login by user list
' is disabled, as described in section 4.4.2 above).
NEW FULL USER NAME
This field allows a User name of up to 25 characters to be entered. This name appears in the 'current access level'
pushbutton at the top left corner of the display screen, in operator notes and so on.
NEW PASSWORD/RETYPE PASSWORD
These fields allow a password to be entered and confirmed. If the password does not comply with the minimum length
requirements in Security Management (if fitted) (
), a warning message (Invalid Password) appears when
the 'Apply' key is operated, and password entry must be repeated.
BASED ON
This picklist allows another user or access level to be used as a permissions template, to simplify the configuration if
several operators are to have identical permissions.
Figure 4.4.3 Add User display page
4.4.4 Remove user
This item appears only if one or more users have previously been added.
Selecting 'Remove User' from the SECURITY picklist allows users to be removed from the user list. The 'Remove'
key and the 'Apply' key must both be used to write the change to the recorder data base. Figure 4.4.4 depicts the dis-
play page.
Figure 4.4.4 Remove User display page
