100 MM GRAPHICS RECORDER: USER GUIDE
HA027271
Issue 12 Mar 04
User Guide
Page 78
4.4.2 Management (option)
This menu selection appears only if the Security Management option is fitted.
Centralised security
If this checkbox is enabled, the following parameters can no longer be edited at the recorder.
Changes to these parameters can be made only by means of Security Management software:
Security\Access: All parameters become 'Read only' (
Security\Management: Login by User List (below) becomes 'Read only'.
Security\Add User (
) no longer appears as a menu item.
Security\Remove User (
) no longer appears as a menu item.
Save/Restore\Restore: Security Data not selectable (
Save/Restore\New: Security Data not selectable (
The Security Revision (previously Security Version) is initially set to -1 when Centralised
Security is enabled. It will remain at this value until a successful download has been per-
formed via Security Manager Software. The Security Revision will then take the downloaded
value (e.g. 139). Any local security revision changes (e.g. max. number of logins exceeded)
cause the value to have a 'local change count', starting at 001 appended to it (e.g. 139.001,
139.002 and so on). The local change count is reset to 000 (and no longer displayed) when the
next download occurs (e.g 140). Downloads can occur automatically when the Security
Manager detects that a local change has occurred, or manually, as and when required.
Login by User List
Enabled: At login time the normal login windowappears, with a pull-down list of users and
access levels. Once a user or access level has been selected from this picklist, the relevant
password must be entered to allow access to recorder configuration.
Disabled: the user must enter both a user ID and the password associated with this ID.
Select the required access level and enter the
password if required
User ID
Logged out
Logged out
Operator
Engineer
Service
Type in your user ID and a password if
required
User ID
Logout
'Login by User List' enabled
'Login by User List' not enabled
