100 MM GRAPHICS RECORDER: USER GUIDE
HA027271
Issue 12 Mar 04
User Guide
Page 62
4.3.5 ARCHIVE CONFIGURATION (Cont.)
MEDIA FULL OPERATION
For Disk Settings only:
Overwrite
Oldest data replaced with latest data when disk is full
Stop
Archiving stops when the disk is full
Notes
1.
The maximum number of history files (total for both groups) is 750 per directory.
2.
When in 'Overwrite' mode, the recorder will overwrite only those files which it has itself created. Thus, if
a disk is inserted which contains history files from another recorder, these cannot be overwritten. The file
names are of the form
UUU....UUUIIIIIIFFGGSSSSSS
, where
IIIIII
represent the lowest three
bytes of MAC address of the recorder which created the file (see
). It is not possible for the
user to delete files created by another instrument (i.e. one with another MAC address).
MEDIA SIZE
For Disk Settings only, allows the size of the Disk to be entered, for user information only. This item is not saved as
part of the configuration.
DISK ARCHIVE CAPACITY
For Disk Settings only, this gives an estimated time to fill the disk, based on the archive rate, the compression ratio,
the disk size and on the exact nature of the data. (Rapidly changing values use more space than static/slowly changing
values.)
MEDIA FULL EVENT LIMIT
For disk settings only, this allows the user to specify a percentage-full value for the disk or pc card, at which the
event source 'Archive media % full' is triggered. The event remains active until the disk or pc card is replaced, or has
data removed from it to make more room available.
ARCHIVE TO REMOTE
Note: Archive to remote is available only if the Ethernet option is fitted
For Remote settings only:
None
Archive to host is initiated by the operator (
Hourly
Archive to host occurs on the hour every hour
Daily
Archive to host occurs at 00:00* hrs each day
Weekly
Archive to host occurs at 00:00* hrs every Monday
Monthly
Archive to host occurs at 00:00* hrs on the 1st of each month
Automatic
The recorder selects the slowest out of ‘Hourly’, Daily, Weekly or Monthly, which is guaranteed not to
lose data (depends on the size of the Trend History Buffer).
*Note: Archive times are not adjusted for Daylight Saving hour changes. Thus if the archive is set to 'daily',
'weekly' or ' monthly' then, during 'Summer Time', the archive will occur an hour late (i.e. at 01:00 hrs. instead
of midnight).
REMOTE PATH
For Remote settings only:
The route to a folder or directory on the remote host, set up as a part of that host’s FTP configuration
