Part number HA029005. Issue 2.0 May-06. 29
4.3
Front panel layout
Beacons:-
ALM
Alarm active (Red)
OP1
Lit when output 1 is ON
OP2
This appears in 3216i only and is lit
when output 2 is ON
OP3
Lit when output 3 is configured to
retransmit the process value
OP4
Lit when output 4 is ON
REM Communications
active
Operator Buttons:-
From any display -
press to return to the
HOME display.
Press to select a new parameter. Hold down
to continuously scroll through parameters
.
▼
Press to change or decrease a value.
▲
Press to change or increase a value.
Message Centre
A scrolling message may appear in this section.
For example, if a high alarm is configured to
operate output 1, and a low alarm is configured to
operate output 4, the scrolling messages ‘ALARM
1 HIGH’ and ‘ALARM 4 LOW’ are shown
together with the beacons ‘ALM’, ‘OP1’ and
‘OP4’. ‘ALM’ flashes if the alarm has not been
acknowledged.
If the input sensor is broken ‘
S.br
’
appears in the
top display and the scrolling message ‘
INPUT
SENSOR BROKEN
appears in the message centre.
Summary of Contents for 3204i
