ETLU4G03
Rev. 003
Section E-
Section E-
Section E-
Section E-WEB INTERFACE
WEB INTERFACE
WEB INTERFACE
WEB INTERFACE
To access to the WEB Interface no installation is required and before using it HTTP server shall be
enabled.
To access to the WEB interface open a WEB browser and insert the device IP address.
The Login page will be loaded (Figure 5). Now insert Username and Password to have access to the
WEB interface.
Using Username “user” and Password “etl3100rt1234” the operator will enter in the WEB interface in a
read only mode.
Using Username “operator” and Password “2euro21234” the operator will be able also to modify some
parameters in the WEB pages.
Figure 5: WEB interface: Login page
WEB interface allows to monitor and manage all the setting parameters of the ETLU4G03 transmitter
unit. In this way a complete remote control of the transmitter unit is available.
Below are listed and explained some pages available on the WEB interface.
NOTE: the images of the WEB pages shown below may slightly change according to the specific setting of the
NOTE: the images of the WEB pages shown below may slightly change according to the specific setting of the
NOTE: the images of the WEB pages shown below may slightly change according to the specific setting of the
NOTE: the images of the WEB pages shown below may slightly change according to the specific setting of the
transmitter unit.
transmitter unit.
transmitter unit.
transmitter unit.
Page 22
CMANU4G03
Jul 2013
Summary of Contents for ETLU4G03
