Rev. 003
ETLU4G03
•
Switch off the amplifier module and switch on it again holding the “SELECT” button placed on the
front panel of the ETL0474G amplifier module in order to make effective the E-Link setting.
•
Once the ETL0474G amplifier module is switched on, push “SELECT” button until the “Channel
Channel
Channel
Channel
Frequency
Frequency
Frequency
Frequency” menu title appears. Enter this menu and check that the transmission frequency value is
the actual frequency of the transmitter unit.
•
Push “SELECT” button until the “MLC Nominal Val
MLC Nominal Val
MLC Nominal Val
MLC Nominal Val” menu title appears. Enter this menu and set the
correct value for the MLC attenuator by means of the push buttons “
+
+
+
+
” and “
----
“, in other to balance
the R.F. output power of the current module respect to the other amplifier modules of the transmitter
unit.
•
All the other ETL0474G amplifier module parameters are factory set.
Refer also to “ ETL0474G R.F. Power Amplifier Operating and Technical Manual” for Amplifier
Refer also to “ ETL0474G R.F. Power Amplifier Operating and Technical Manual” for Amplifier
Refer also to “ ETL0474G R.F. Power Amplifier Operating and Technical Manual” for Amplifier
Refer also to “ ETL0474G R.F. Power Amplifier Operating and Technical Manual” for Amplifier
command explanation.
command explanation.
command explanation.
command explanation.
Jul 2013
CMANU4G03
Page 21
21
21
21
Summary of Contents for ETLU4G03
