Power supply
This sun lamp should only be connected to a 230V 50Hz socket. Never place the sun lamp
in a bathroom, sauna, or any other damp room.
Protective goggles
Ultraviolet radiation is harmful to the eyes. A pair of protective goggles, which must be
worn with every use, has therefore been included with this sun lamp. Never use "regular"
sunglasses instead of the protective goggles. Even shutting the eyes provides inadequate
protection. A spare pair is also included.
Operation
Start the facial tanner by opening the two side panels by pushing button
A
(see drawing
1)
.
Panels will open themselves by a built in spring. Open the panels till they cannot go any
further
1 B
. DON’T FORCE SINCE THAT MAY CAUSE DAMAGE. The panels should stay in a
certain angle to give maximum side tanning on the face. Turn the facial in the right position
towards the face. The chosen position can be fixed by turning the knob on the right side of
the facial (turn to the left
1 E
). Plug the mains lead into the socket and set the timer
1 C
by
turning the knob to the right to the time you wish to use the facial tanner.
DRAWING 1
Timer
Using the timer will automatically switch on the facial and lamps will start burning. Turn the
knob to the right to the desired time (max. 30 min.). The timer will then shut off the lamp
after the time has elapsed. If you stop using the facial tanner before the time is up just let
Downloaded from www.vandenborre.be
