Eurogames SRL – Operation and maintenance handbook – BUMPER CAR & MINI BUMPER CAR
10
3. Position the first battery
1
(Fig.2).
ATTENTION
It is possible to install 80 Ah batteries inserting the spacers B or 120 Ah batteries by removing
the spacer B.
4. Connect the positive terminal marked with
+ (plus)
to the
positive (+)
pole onto the battery using the
red or brown cable;
5. Connect the negative terminal marked with
– (minus)
to the
negative (-)
terminal onto the battery
using the black cable.
6. Carry out the same procedure for the second battery
2
(Fig.2).
7. Shut the body making sure that it closes well. If necessary adjust the rubber blocks as described in
the concerning chapter.
Fig. 2
Tyre pressure
Check the pressure of the tyres which has to be
2 atmospheres
.
Rubber dinghy pressure
Check the pressure of the tyres which has to be
0,18 bar / Atm. - 2,64 Psi - 18K Pa
.
Setting the game time
It is possible to set the race time by programming the digital control box
(Fig.3). The adjustment range is between 30 and 990 seconds.(see
“DIGITAL TIMER” section).
Setting the sound volume
It is possible to set the volume programming the digital control box (see
“DIGITAL TIMER” section).
Fig. 3
Summary of Contents for Bumper Car Series
Page 2: ......
