Eurogames Srl – Operation and maintenance handbook – BUMPER CAR & MINI BUMPER CAR
29
Changing the rubber dinghy
To change the rubber dinghy do as follows:
1. Deflate the rubber dinghy removing the cap
A
and pushing on the red
B
valve (Fig. 20a). Push on
the rubber dinghy to deflate it easier.
2. When the rubber dinghy is completely deflated disconnect the electric wirings of the battery charge
plug and of the two control boxes.
3. Remove the fixing screws
C
(Fig. 20b) of the gas springs keeping the body raised.
4.
Remove the straps
D
anchoring the body shell’s power cables to the chassis.
5. Remove the anchoring bolt
E
.
6. Place carefully the body on the ground without damaging it.
7. Remove the rubber dinghy and replace it.
8. Inflate the new rubber dinghy by the supplied pump(Fig.20d).
Fig. 20a
Fig. 20b
Fig. 20c
Fig. 20d
Summary of Contents for Bumper Car Series
Page 2: ......
