Eurogames SRL – Operation and maintenance handbook – BUMPER CAR & MINI BUMPER CAR
24
“Hyper Bumper” gaming system configuration
To configure the “Hyper Bumper” gaming system (normally contained in the monitor casing) select the
value 32 under “Device Selected” and press the [PROG] button. The configuration parameters will
appear on the display. Use the [+] and [-] buttons to select the required parameter and the [SEL] button
to enter or exit the editing mode. A blinking square cursor will indicate the editing mode is active. If a
parameter is modifiable, its value can then be changed using the [+] and [-] buttons. Upon exiting the
editing mode, the modified parameter is recorded.
If the remote control is within range of the “Hyper” gaming system, the
following will appear on the display:
If no connection can be established between the remote control and the “Hyper” gaming system, the “*
No Signal *” message will appear on the display. When that happens, make sure the “Hyper” gaming
system is turned on and that the value 32 has been selected on the remote control.
The following is a list of the parameters that can be modified via the remote control.
[MODE
]: (HYPER) selects the gaming mode. Currently only the “Hyper” option is available. The
“Hyper” mode is the standard Free for All combat mode. The first player to reach, without
drawing, the “Record” score – set using the “Record” parameter – wins a free ride (provided the
“Record” parameter has a value different from 0).
[TIME]
: (min. 30 Sec.) sets the ride duration.
[RECORD]
: (min. 0) sets the minimum score to reach to win a free ride. If the value is 0, no free ride will
be awarded.
[BUMPERS]
: (min. 1) sets the number of Hyper Bumpers in the game. This parameter allows the system
to optimise the handling of all the elements in play. The value of this parameter should not be lower than
the actual number of Bumpers on the track.
Important:
The numbering of the Bumpers must increase
sequentially from 1. If one or more Bumpers are stopped or removed from the track, this parameter
should still be set to reflect the peak number of Bumpers in play.
[WINNER]:
When this option is set to "
SINGLE
", the only player who has exceeded the record score and
scored at least one point more than other players, will receive a free game. If two or more players have
the same score no free game will be assigned. When this option is set to "
MULTI
" all the players who
have exceeded the record score will receive a free game.
[LANGUAGE]
: (IT, UK, FR) selects the gaming language. The messages appearing on each Bumper’s
display will be in the selected language.
The “* - END - *“ message will be displayed at the end of the available parameters.
Batteries
The remote control unit is powered by 2 common AA 1.5V batteries. The replacement of the batteries is
easy trough a small batteries cover placed in the bottom part of the case.
IMPORTANT
During replacement please take care of the battery polarity direction. Wrong position can damage the
remote control. To avoid problems with a possible acid leakage remove batteries if the remote control
unit will be stored unused for a long time.
Do not connect any power supply unit to the remote control unit connectors to avoid damages.
********************
* - HYPER BUMPER - *
********************
Summary of Contents for Bumper Car Series
Page 2: ......
