Eurogames SRL – Operation and maintenance handbook – BUMPER CAR & MINI BUMPER CAR
48
25. TROUBLESHOOTING
1 - The “Bumper Car” does not work.
a -
ensure the micro switch of the coin box is well connected and in efficient working order;
b -
ensure the battery and the motor connectors are properly connected;
c -
disconnect the connectors
A
-
B
(Fig.23) and connect them to a working “
Bumper Car
” control box
or to a spare control box;
d -
check if the 80 Ah fuse
C
(Fig.23) works and if necessary change it.
2 - The “Bumper Car” has no power.
a -
check the battery condition and recharge if necessary;
b -
have the battery checked by a qualified technician.
3 - The “Bumper Car” does not give out the typical running noise.
a -
Ensure the volume is properly adjusted;
b -
Ensure the loud speaker is in efficient running order and the contacts are undamaged;
c -
replace the timer.
4 - Time cannot to be adjusted.
a -
if the “
Bumper Car
” never stops and the warning light of the machine ready in the front of the
vehicle does not blink, replace the timer;
b -
replace the timer;
5 - The battery charger does not charge.
a -
ensure the mains power is supplied;
b -
check the contacts of the connectors;
c -
if, when connecting a down battery to the battery charger, the charge end is signalled at once
(green LED on), have the battery recharged at an authorized service centre or replace the battery;
d -
check the 20 Ah fuse being on the cable that connects the timer to the battery.
6 - The “Bumper Car” suddenly stops when it is operating regularly?
a -
this could be due to electronic components overheating;
b -
this could be due to engine overheating;
c -
if the cause is one of the above, let the “Bumper Car” cool down and it will resume working
properly afterwards. Should this problem occur again, we recommend adjusting Speed and/or
Ramp Up settings choosing lower values. Such settings are in the protected menu (see chapter
“DIGITAL CONTROL BOX”).
Fig. 23
Summary of Contents for Bumper Car Series
Page 2: ......
