EuroGames Bumper Car Series, Operation And Maintenance Handbook

Page: 16 / 51

Eurogames SRL – Operation and maintenance handbook – BUMPER CAR & MINI BUMPER CAR
16
“Main Menu” parameters
The parameters included in the main menu are the following: (some are not modifiable)
Time=000s Bat85% Time to end of game and battery charge level.
P.Counter=000000:00 Partial coins counter. The 2 digits on right side of “:” symbol show the
accumulated if the required coins for a game (Game-Coins) are not reach.
To reset the coins counter the previous option (Time, Bat) must be on screen. Press the “+” button for at
least 5 seconds. The following message will be shown.
ResetCounter=No To reset the counter press “Enter” button and select YES with the “+”
button. The counter will be reset to 0.
Volume=07 Sound effects volume. It can be set from 1 to 30.
Game-Coins=01 Number of coins for a game. If it is set to 0 there is no need of coins to start the
game. To enable this free game function the FREE COINS option on protected
menu must be set to ON.
Game-Time=120s Game time (seconds).
Speed-Forw=70% Maximum motor power Forward.
Speed-Rev=70% Maximum motor power Reverse.
Acceleration=080 Motor acceleration speed. Bigger number means faster acceleration.
Deceleration=080 Motor deceleration speed. Bigger number means faster deceleration.
RemoteControl=01 Identification number for remote control (1 – 32). This number allows you to set
parameters in the control box and START/STOP the game from a remote
control unit. Every car must have its own unique number otherwise the
programming of a single machine will fail.
RemoteSTART=On For this parameter explanation look at the “Radio Module” chapter.
Language=ENGLISH Language selection for audio messages:
ITALIAN , ENGLISH , FRENCH , GERMAN , SPANISH , GREEKE, PORTOG
Standby=20 Only on Hyper Bumper: Time (minutes) for Standby function. If the Bumper is
not used for this time the LCD display and the LED ring is turned OFF.The 0
value disable the Standby function. The Bumper Car exit from the stanby
condition if a coin is inserted or if a Joystick button is pressed.
Wakeup=0 Only on Hyper Bumper: Time (minutes) for Wakeup function. When the
Bumper Car is in Standby mode, this time sets a delay for a temporary makeup
function. The LED ring will be turned ON and a sound effects will be played for
few seconds.
Bat=24.7v T=026° This parameter shows the battery voltage and the Timer internal temperature.
I1=000A I2=000A Real time motors current value.