EuroGames Bumper Car Series, Operation And Maintenance Handbook, Page: 18 / 51

Eurogames SRL – Operation and maintenance handbook – BUMPER CAR & MINI BUMPER CAR
18
Pot1=128 -> +000 Joystick pot. control 1 reading value.
Pot2=128 -> +000 Joystick pot. control 2 reading value.
Pot Min=092 Pot. minimum value. See Joystick calibration procedure on User’s Manual.
Pot Max=155 Pot. maximum value. See Joystick calibration procedure on User’s Manual.
Pot DeadZone=015 Pot. neutral central zone. See Joystick calibration procedure on User’s Manual.
Pot2 Reverse =On Pot. control 2 direction reverse option.
Accel.X=0 Hit sensor threshold level for X direction. This sensor detects hits from front and
back. Set it to 0 to disable this sensor. Optional function on request.
Accel.Y=3 Hit sensor threshold level for Y direction. This sensor detects hits from sides. Set
it to 0 to disable this sensor. Optional function on request.
Accel.Z=0 Hit sensor threshold level for Z direction. Not used in the current software
version.
Switch= - - - - - - - - -
GLHRKCSEF Input status. Every input shown its own letter.
G=COIN, L=LOW, H=HIGH , R=RETRO, K=CLOCHE,
C=CLACSON, S=SENSOR , E=EMERGENCY, F=TURN LIGHT
Software V4.0BC Software version.
Other functions
- If no buttons are pressed for at least 60 seconds the screen returns to the main menu first item.
-
During the over current alarm condition the display shown the “MotorHighCurrent” message. An
alarm sound like an horn is emitted and the game lamp is flashing. The alarm will reset automatically
after about 4 seconds.
-
If the cooling fin temperature exceeds the set maximum, a “High Temperature” alarm appears, the
race ends and the motors stop. You must wait for the automatic alarm reset in order to be able to
start other races.
-
When the game is over if the battery voltage is low a “LOW BATTERY” message is emitted every 7
seconds.
-
If more than one coin is needed to start the game after the first coin is inserted the lamp starts to
blink and a sound message is played. The message depends on the language parameter selected.