EUROCOM LP-297PB User Manual Download Page 71

Page: 71 / 130

Drivers & Utilities

What To Install 4 - 3

Version Conflict Message

During driver installation if you encounter any “file
version conflict” message, click “Yes” to choose to
keep the existing (newer) version.

Updating/Reinstalling Individual
Drivers

If you wish to update/reinstall individual drivers it
may be necessary to uninstall the original driver.

To do this go to the

Control Panel

in the

Windows

and double-click the

Add/Remove Programs

item.

If you see the individual driver listed

(if not

see below), uninstall it, following the on screen
prompts (it may be necessary to restart the comput-
er). Go to the appropriate section of the manual to
complete the update/reinstall procedure for the
driver in question.

If the driver is not listed in the

Add/Remove Pro-

grams

item:

1. Click

Start

(menu), point to

Settings

and click

Control Panel

. Double-click

System

(icon)

and then click

Hardware

(tab) >

Device Man-

ager

(button).

2. Double-click the

device y

ou wish to update/

reinstall the driver for (you may need to click

“+”).

3. Look for the

Update Driver

button (check the

Driver

tab) and follow the on screen prompts.

Summary of Contents for LP-297PB



































































































































Search results

Summary of Contents for LP-297PB

Reviews:

Related manuals for LP-297PB

Brands by name

Popular brands

EUROCOM LP-297PB, User Manual

Search results

Summary of Contents for LP-297PB

Reviews:

Related manuals for LP-297PB

Brands by name

Popular brands