Advanced Controls
Switching/Enabling Displays 3 - 9
3
Intel(R) Dual Display Clone
In addition to using a single display device (LCD or VGA monitor or TV), you
can use
Intel(R) Dual Display Clone Mode
to drive two displays with the
same content. To Enable Dual Display Clone Mode:
1.
Plug the VGA monitor or TV into the appropriate port.
2.
Go to the
Intel(R) 82865G
Graphics Controller Properties
control panel
(see
“Intel Video Driver Controls” on page 3 - 5
) and select
Devices
(tab).
3.
Click the
Intel(R) Dual Display Clone
icon in the devices tab (
Note
: this
option is only available when you have attached the CRT or TV).
4.
Choose one device to be the
Primary/Secondary
display.
5.
Adjust the settings by clicking the
Device Settings
(button) if necessary.
6.
Click
Apply
>
OK
and close the control panels.
Figure 3 - 5
Device Settings
(Dual Display Clone
Mode)
Summary of Contents for LP-297PB
