EUROCOM D900T PHANTOM, User Manual

Page: 60 / 164

Video & Audio Controls
3 - 10 Attaching Other Displays
3
Display Modes
Single Display
Only one of your displays is used.
Clone Mode
Clone Mode simply shows an exact copy of the Primary display desktop on
the other display(s). This mode will drive multiple displays with the same con-
tent and each display device can be configured independently.
Dualview
Dualview treats both connected displays as separate devices, and they act as a
virtual desktop resulting in a large workspace. When Dualview is enabled, you
can drag any icons or windows across to the other display desktop. It is there-
fore possible to have one program visible in one of the displays, and a different
program visible in the other display (Dualview is not available in
Windows
2000 ).
Display Wizard
Use the Display Wiz-
ard in the Desktop
Management window
to quickly setup and
configure any attached
displays (see
Figure 3
- 4 on page 3 - 6 ).