EUROCOM D900T PHANTOM, User Manual

Page: 138 / 164

Modules
8 - 20 RAID Configuration
8
4. You will now need to format the array as if it were a single hard drive.
5. Have a floppy disk ready and copy the RAID\Drivers folder from the Device
Drivers & Uti User’s Manual CD-ROM (Navigate/ Browse.. to
D:Drivers\RAID\FASTTRAK ) to the floppy disk.
6. Startup from your operating system CD ( Windows XP or Windows 2000
including Service Pack 4 ).
7. Press the F6 key when you see the message “ Press F6 if you need to
install third party SCSI or RAID driver ”.
8. When you see the Windows Setup menu appear, press the “ S ” key to
“ Specify Additional Device ”.
9. Make sure you have the floppy disk with the RAID drivers copied to it
inserted in the external USB floppy disk drive.
10. Select the appropriate controller for your operating system Windows 2000
or Windows XP and press Enter (see below).
11. The system will now read from the floppy drive and return to the Windows
Setup Menu .
12. Press Enter to continue installing the operating system as normal (see your
Windows documentation if you need instructions on installing the Windows
OS).
Figure 8 - 8
FastTrak
Controller OS
Select
WinXP Promise FastTrak 376/378(tm) Lite Controller
Win2000 Promise FastTrak 378(tm) Lite Controller