EUROCOM D900T PHANTOM, User Manual

Page: 147 / 164

Troubleshooting
Display 9 - 9
9
Display
Problem Possible Cause - Solution
Nothing appears on
screen. The system is in a power saving mode . Toggle the sleep/resume key combination, Fn + F4
(see “Sleep Button” on page 4 - 8 ).
\
The screen controls need to be adjusted. Toggle the screen control key combinations Fn +
F8/F9 (see “Opening the LCD” on page 3 - 2 ). If you’re connected to an external monitor,
make sure it’s plugged in and turned on. You should also check the monitor’s own
brightness and contrast controls.
The computer is set for a different display. Toggle the screen display key combination, Fn
+ F7 (see “Keyboard Video Controls” on page 3 - 2 ). If an external monitor is
connected, turn it on.
The screen saver is activated. Press any key or touch the TouchPad .
No image appears on the
external monitor I have
plugged in and powered
on. You haven’t installed the video driver and configured it appropriately from the Control
Panel.
See “What to Install” on page 5 - 1 for instructions on installing the driver, and
see “NVIDIA Video Driver Controls” on page 3 - 3 for instructions on configuring the
video driver.