The reception symbol flashes during the search for the radio signal.
When there is no search active, the reception symbol is dark.
Instead of the measured values, horizontal bars are displayed.
The reception symbol remains lit when the signal is received.
• If the signal transmission has been interrupted and is not restored within one hour, the
reception symbol goes out. Instead of the measured values, the indicator Er (Error) appears.
• If the signal is not received within 48 hours, replace the batteries of the respective outdoor
sensor. Then proceed as described above to pair the weather station and the outdoor sensor.
14. Selecting the channel
This function is only required if you have several outdoor sensors.
• In normal display mode, press the C button to switch to the next channel.
• In normal display mode, press and hold the C button for 2 seconds to switch
through the channels consecutively. After a beep signal is emitted, the channels are shown
consecutively for 4 seconds each.
During consecutive display, only channels on which a signal is transmitted are shown.
All inactive channels are skipped.
• During consecutive display, press the C button to stop consecutive display and
show the current channel permanently.
45
