27
EN
h) Take care against injury to feet and hands from the cutting
means.
i) Always ensure that the ventilation openings are kept clear of
debris.
j) Do not overreach. Keep the balance at all times. Always be sure
of the footing on slopes. Walk, never run.
k) Warning! Never touch moving hazardous parts before battery
pack is removed and the moving hazardous parts have come to a
complete stop.
l) Warning! Never operate the machine with defective guards or
shields, or without safety devices.
Maintenance and storage
a) Disconnect the product from the power supply (i.e. remove the
plug from the mains, remove the disabling device or removable
battery) before carrying out maintenance or cleaning work.
b) Use only the manufacturer’s recommended replacement parts
and accessories.
c) Inspect and maintain the product regularly, have the product
repaired only by an authorized repairer.
d) When not in use, store the product out of the reach of children.
e) Never replace non-metallic the cutting means with metallic
cutting means.
f) Improper maintenance will lead to malfunction /failure of the
product.
g) Inspect the product before each use, after dropping the product
or exposing to other impacts to identify significant defects.
Check for loose fasteners and damaged parts, such cracks in the
cutting attachment.
Special safety instructions for battery-operated tools
a) Ensure that the tool is switched off before inserting the battery.
Inserting a battery
into a tool that is switched on may result in accidents.
b) Recharge the batteries indoors only because the battery charger is designed for
indoor use only.
Risk of electric shock.
c) To reduce the electric shock hazard, unplug the battery charger from the mains