34
EN
Charging time
Approx. 90min
Protection class
II
Noise emission value
Noise measurement value determined in accordance with EN 50636-2-91
Sound pressure level L
PA
80.6dB
Uncertainty K
3dB
Sound power level L
WA
91.3dB
Uncertainty K
2.29dB
Guaranteed L
WA
in accordance with 2000/14/EC amended by 2005/88/EC
Guaranteed L
WA
96dB
Vibration emission value
Vibration value determined in accordance with EN 50636-2-91
Rear handle a
h,w
2.11m/s
2
Front handle a
h,w
2.32 m/s
2
Uncertainty K
1.5m/s
2
- The declared vibration total values and the declared noise emission values have been
measured in accordance with a standard test method and may be used for comparing
one tool with another.
- The declared vibration total values and the declared noise emission values may also be
used in a preliminary assessment of exposure.
WARNINGS
- The vibration and noise emissions during actual use of the power tool can differ from the
declared values depending on the ways in which the tool is used especially what kind of
workpiece is processed; and
- It is necessary to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running
idle in addition to the trigger time).
BEFORE USE
Unpacking
1. Unpack all parts and lay them on a flat stable surface.
2. Make sure the delivery contents are complete and free of damage. If you find that parts
are missing or show damage, do not use the appliance but contact your dealer. Do not
use the appliance unless missing parts have been delivered in addition or defective parts
have been replaced. Using an incomplete or damaged appliance represents a hazard to
people and property.
3. Ensure that you have all the accessories and tools needed for assembly and operation.