147
FPGA die temperature error
Applies to
1
Random errors could occur in the FPGA if its core temperature becomes excessive. Therefore,
for security reasons, the stream acquisition is stopped when the measured FPGA die
temperature reaches 103°C!
The
"FPGA temperature is too high; stopping operation to prevent damaging the card"
Memento message is sent repeatedly every second until the measured temperature decreases
below 97°C.
TIP
Stopping the acquisition reduces significantly the heat production of the
FPGA. This action is aimed to reduce the die temperature, to prevent the
application against unexpected FPGA behavior and to prevent damaging
the card.
WARNING
When such event occurs, the user must immediately shut down the system
and revise the card cooling in the host PC before restarting!
1
3621 Coaxlink Mono CXP-12
,
3621-LH Coaxlink Mono CXP-12 LH
,
3622 Coaxlink Duo CXP-12
and
3622-LH
Coaxlink Duo CXP-12 LH
.
eGrabber
Hardware Manual
