132
AC characteristics
Parameter
Conditions
Min.
Typ.
Max.
Units
Positive pulse width
2.5
µs
Negative pulse width
2.5
µs
Pulse rate
0
200
kHz
Turn-ON delay
1
25 °C; 100 kHZ; 5 V square signal
LineFilterStrength
=
Lowest
(
LineFilterDelay
=
500
ns)
800
ns
Turn-OFF delay
2
1350
ns
NOTE
1.
The "Turn-ON" delay is defined as the time difference between a
transition of state at the input that turns ON the opto-coupler and the
subsequent transition in the FPGA.
2.
The "Turn-OFF" delay is defined as the time difference between a
transition of state at the input that turns OFF the opto-coupler and the
subsequent transition in the FPGA.
These delays include the delay introduced by the digital line filter controlled
by the
LineFilterStrength
GenApi feature!
Isolation characteristics
Parameter
Value
Isolation grade
Functional
Max. DC voltage
250 V
Max. AC voltage
170 V
RMS
NOTE
The functional isolation is only for the circuit technical protection. It does
not provide an isolation that can protect a human being from electrical
shock!
Logical map
The state of the port is reported as follows:
Input current
Logical State
I
IN
≥ 3 mA
HIGH
I
IN
< 0.5 mA
LOW
Unconnected input port
LOW
eGrabber
Hardware Manual
