Important:
Before use, hard floors should be throughly swept and carpets should be thoroughly dry vacuumed. However, we
recommend that Euroclean Steem is not used on:
•
Bare wood floors or any surfaces where wood is exposed, as it will absorb moisture and may war pit.
•
Damaged hard floors or hard floors with abnormal gaps present.
Also, do not keep the mop in one place for an extended period, where the continual heat may cause shrinkage or distortion on
carpets and laminate flooring.
Important:
Please remember that Euroclean Steem operates by emitting steam at an increased temperature of 115°C.
Always test on an inconspicuos area first. Never use it on objects or surfaces which cannot resist this temperature, or on
delicate materials such as dralon, plastic, natural fur, etc.
If in doubt, check carefully on a part of the material where minor marks will not matter.
Important:
When you have finished cleaning, ensure that both the power switch and steam switch are turned OFF and that
the plug is removed from the electrical outlet.
UPRIGHT STEAMING:
OPERATION
Turn the steam switch ON.
Reduce the steam flow to a lower setting by turning the steam control regulator. Use
both forward and backward strokes across the floor area.
Note:
The steam output can be regulated using the variable steam setting control on
the side of the handle.
UPRIGHT STEAMING: HARD FLOOR CLEANING AND STUBBORN STAINS
Connect the floor cloth (hard floor) to the floor head by stretching the elasticated skirt
around the floor head and secure it into place using cloth grips.
Important:
When cleaning parquet, laminate and wood floors, set the steam regulator control to “minimum”.
Warning:
The floor cloth becomes very hot during use. Please wait until the cloth is cool before removing, wringing, rinsing or
replacing the cloth.
When the cloth becomes wet, wring out the moisture, or replace with a clean, dry cloth.
OPERATING EUROLCEAN STEEM
11
Summary of Contents for Euroclean Steem
Page 23: ...20...
