12
OPERATING EUROLCEAN STEEM
If the cloth becomes too dirty, rinse out the dirt, or replace with a clean, dry cloth.
To remove stubborn stains or embedded grime on hard surfaces, fold and attach the floor
cloth (carpet) whilst leaving the brushes underneath the floor head visible.
Move the brush sliders so that the brushes appear underneath the floor head. Move
the brushes backwards and forwards over the selected area.
Important:
Do not use the brushes for routine carpet and hard floor cleaning as
unnecessary scrubbing may cause damage. The brushes should only be used for
removing stubborn stains and grime.
UPRIGHT STEAMING:
CARPET CLEANING AND PILE REJUVENATION
Carpets should be dry vacuumed before steam cleaning. For Best results use Euroclean range of Vacuum Cleaners.
For free movement of the steamer, over larger carpeted areas, the carpet glide
attachment can be used.
Detach and remove the steam comb section from the carpet glide attachment.
Fold the cloth and place inside the carpet glide base.
Secure the floor head inside the carpet glide base
and connect the cloth by using the floor cloth
grips.
To rejuvenate flattened carpet piles, remove the
cloth and connect the carpet glide base to the floor
head, with the steam comb section in place.
When cleaning carpets and rugs, set the steam regulator control to “maximum”. Use
slow forward and backward cleaning strokes over the desired area.
Using with other accessories (attachment mode)
Important:
When the steam cleaner is used in a vertical or inclined position, shake the steam cleaner gently, to ensure that the
weighted tubing inside the tank is in the correct (immersed) position.
Summary of Contents for Euroclean Steem
Page 23: ...20...
