EURA E2000-0004 S2B, Safety Instructions And Operation Manual

Page: 68 / 82

14) Parameter group 700: Error handling and protection functions
Fault history
Read only:
F708
F711 Frequency at last fault (Hz)
F712 Current at last fault (A)
Last fault
F713 DC-Link voltage at last fault (V)
F709 Fault codes: See page 56
F714 Frequency at fault last but one (Hz)
F715 Current at fault last but one (A)
Fault last but one
F716 DC-Link voltage at fault last but one (V)
F717 Fault last but two (Hz)
F710
F718 Current at fault last but two (A)
Fault last but two
F719 DC-Link voltage at fault last but two (V)
Error event counters:
F720 Overcurrent OC
F721 Overvoltage OE
F722 Overtemperature OH
F723 Overload OL1
Protection functions
– configuration
Activation of phase-loss, under-voltage and temperature monitoring
F724 Input phase-loss monitoring
Selection: 0: deactivated Default setting: 1
1: activated (T2/T3 models)
F725 Under-voltage reset
Selection: 1: manual reset
Default setting: 2
2: autoreset
F726 Over-temperature monitoring
Selection: 0: deactivated
Default setting: 1
1: activated
F727
Output phase-loss monitoring
Selection: 0: deactivated
Default setting: 1
1: activated
Delay for inverter error trip
F728 Delay phase-loss detection (sec.) Range: 0.1 - 60.0 sec. Default setting: 0.5 sec.
F729 Delay for under-voltage detection (sec.) Range: 0.1 - 60.0 sec. Default setting: 5.0 sec.
F730 Delay for over-temperature detection (sec.) Range: 0.1 - 60.0 sec. Default setting: 5.0 sec.
F732 Threshold for under-voltage detection (V)
Range: 0.1
– 450V
230V inverter: 215 V
(DC-Link voltage) 400V inverter: 400 V
Overcurrent detection via software OC1
F737 Software controlled overcurrent detection
Selection: 0: deactivated
Default setting: 0
1: activated
F738 Software current limit (rated current unit) Range: 0.50 - 3.00 Default setting: 2.5
F739 SW over-current inverter-trip counter OC1
E2000+_Rev.02 -E- SOFT Rev. 5.09
- 59 -
© 2016-06-KPP-EURADRIVES EUROPE GmbH