16
17
Use the Boundary Strips
With the Boundary Strips, you can keep RoboVac away from any area or item you do not
want RoboVac to clean. RoboVac will recognize the Boundary Strips and not cross into the
blocked-off area.
Identify the area or item you do not want RoboVac to clean.
If necessary, use scissors to cut the Boundary Strips to a shorter length. Be sure to
correctly measure the length before cutting.
Apply an adhesive tape to lay the boundary strips flat on the floor. Make sure the strips
are placed FLAT on the floor.
T
- If the Boundary Strips are rolled up, remove and then re-apply on the floor with an
adhesive tape. Otherwise the Boundary Strips may not work well.
- Be careful not to damage the floor when using adhesive tape. It is not recommended
for use on carpets.
- Keep the Boundary Strips away from objects that emit excessive heat.
Cleaning and Maintenance
Clean the Dust Collector and Filters
Press the dust collector release button to pull the dust collector out.
Open and empty the dust collector.
2
1
Separate the filter cover by pulling the hooks as shown.
Take out the foam filter and high-performance filter.
3
4
Clean the dust collector and filters with a vacuum cleaner or a cleaning brush.
Put the filters and filter cover back together in the dust collector.
